List of Testing Services
Please refer to list of tests below. For more information contact; +92-337-7401455
| Test Name,Standard,Accreditation |
|---|
| Single Fiber Strength test,ASTM D 3822, |
| Single Fiber Linear Density (vibroscope method),"ASTM D 1577, ISO 1973", |
| Single Fiber Crimp Properties (synthetic),HOECHST- (TREVIRA-) method, |
| Single Fiber Length,ASTM D 5103, |
| Fiber Composition (Qualitative),AATCC 20,IS0/IEC 17025:2017 |
| Fiber Composition (Quantitative) upto 2 fibre,"AATCC 20A, ISO 1833",IS0/IEC 17025:2017 |
| Fiber Composition (Quantitative) upto 3 fibre,"AATCC 20A, ISO 1833",IS0/IEC 17025:2017 |
| Fiber Composition (Quantitative) upto 4 fibre,"AATCC 20A, ISO 1833",IS0/IEC 17025:2017 |
| Cotton Fineness,"ISO 2403, ASTM D 1148-11", |
| Cotton Fiber Length and length uniformity,"ISO 6989, ASTM D5103-7", |
| Cotton Breaking Strength by Pressley Tester.,"ASTM D 1445-12, ISO 3060:1974", |
| Cotton Trash Content,ASTM D 5867-5, |
| Fiber Moisture Content,ASTM D 2495-12, |
| Cotton Fiber Tests (HVI),ASTM D5867-12, |
| Fiber Fragment Release During Home Laundering,AATCC 212, |
| Yarn Unevenness (USTER-5),ASTM D1425,IS0/IEC 17025:2017 |
| Linear Density by Skein Method,"ASTM D 1907, ISO 2060",IS0/IEC 17025:2017 |
| Linear Density by Short Length Method,ASTM D 1059,IS0/IEC 17025:2017 |
| Tensile Properties of Single Yarn,"ASTM D 2256, ISO 2062",IS0/IEC 17025:2017 |
| Lea Breaking Strength,"ASTM D 1578, ISO 6939", |
| Filament Shrinkage-force or percent shrinkage,Standard Protocol, |
| Filament Draw-force of POY, FDY or FOY",Standard Protocol, |
| Crimp-force or percent crimp of Texturised Yarn,Standard Protocol, |
| Twist by Contraction Method,"ASTM D 1422, ISO 17202",IS0/IEC 17025:2017 |
| Twist by Direct Method,"ASTM D 1423, ISO 2061",IS0/IEC 17025:2017 |
| Classification of Yarn Faults,Standard Protocol, |
| Yarn Crimp and Yarn Take-up in Woven Fabric,ASTM D 3883-4, |
| Yarn Type Analysis,ASTM D 3887-4, |
| Yarn Coefficient of Kinetic friction,ASTM D 3108, |
| Fabric Width,"ASTM D 3774, ISO 22198",IS0/IEC 17025:2017 |
| Fabric GSM,"ASTM D 3776, ISO 3801",IS0/IEC 17025:2017 |
| Fabric Construction,ASTM D 3775,IS0/IEC 17025:2017 |
| Pilling Resistance by Martindale Tester upto 2000 Rev,"ASTM D 4970-12, ISO 12947-2",IS0/IEC 17025:2017 |
| Pilling Resistance by ICI Method upto 6 hrs,"ISO 12945-1, BS 8479", |
| Tearing Strength by Elmendorf Tester,"ASTM D 1424-04, ISO 13937-1",IS0/IEC 17025:2017 |
| Tearing Strength (trouser Shaped, single rip)",ISO 13937-2,IS0/IEC 17025:2017 |
| Tear Strength (wing shaped),ISO 13937-3,IS0/IEC 17025:2017 |
| Random Tumble Pilling,"ISO 12945-3, ASTM D 3512",IS0/IEC 17025:2017 |
| Bursting Strength of Fabrics,ISO 13938-2 ASTM D 3786,IS0/IEC 17025:2017 |
| Breaking Strength by Grab Method,"ASTM D 5034, ISO 13934-2",IS0/IEC 17025:2017 |
| Stretch Properties of Fabrics,ASTM D 6614, |
| Abrasion Resistance 5000 -10000 Rev,"ISO 12947-2, ASTM D4966",IS0/IEC 17025:2017 |
| Crease Recovery of Woven Fabric,"AATCC 66, ISO 2313", |
| Wrinkle Recovery,AATCC 128, |
| Dimensional Stability to Washing (Fabrics) After 1 Wash,AATCC 135/ ISO 6330,IS0/IEC 17025:2017 |
| Dimensional Stability to Washing (Garments) After 1 Wash,AATCC 150,IS0/IEC 17025:2017 |
| Smoothness of Seams in Fabrics after After 1 Wash,AATCC 88 B,IS0/IEC 17025:2017 |
| Retention of Creases in Fabrics after After 1 Wash,AATCC 88 C, |
| Skew Change After 1 Wash,AATCC 179/ SIO 16322-2, |
| Smoothness Appearance After 1 Wash ,"AATCC 124, ISO 15487",IS0/IEC 17025:2017 |
| Soil Release of Fabric After 1 Wash,AATCC 130,IS0/IEC 17025:2017 |
| Color Evaluation by Spectrophotometer,AATCC Evaluation Procedure, |
| Breaking Strength by Strip Method,"ASTM D 5035, ISO 13934-1",IS0/IEC 17025:2017 |
| Seam Strength,"ISO 13935-1/2, ASTM D 1683", |
| Seam Slippage,"ISO 13936-2, ASTM D 683", |
| Weave Identification,Lab Developed, |
| Weave and Design Pattren,ASTM D 3775, |
| Gauge of Knitting Fabric,Standard Protocol, |
| Courses and Wales of Knitted Fabric,Standard Protocol, |
| Thickness of Fabric,"ASTM D1777, ISO 5084",IS0/IEC 17025:2017 |
| Bow and Skew in fabric,"ASTM D 3882, ISO 13015", |
| Color Fastness to Sea Water,"AATCC TM 106, ISO 105-E02", |
| Dye-ability of fabric,Standard Protocol, |
| Color Fastness to Perspiration,"AATCC 15, ISO 105-E04",IS0/IEC 17025:2017 |
| Color Fastness to Water,"ISO 105-E01, AATCC 107",IS0/IEC 17025:2017 |
| Color Fastness to Saliva,"GB/T 18886, DIN 53160-1",IS0/IEC 17025:2017 |
| Color Fastness to Washing,"ISO 105-C1/2/3/6, AATCC 61",IS0/IEC 17025:2017 |
| Color Fastness to Dry Cleaning,"AATCC 132, ISO 105-D01",IS0/IEC 17025:2017 |
| Color Fastness to Light upto 24 hrs,"ISO 105-B02, AATCC 16.3",IS0/IEC 17025:2017 |
| Color Fastness to Weathering upto 24 hrs,ISO 105 B04,IS0/IEC 17025:2017 |
| Color Fastness to Perspiration Light upto 24 hrs,AATCC 125, |
| Color Fastness to NaCl Bleach in Home Laundering,AATCC 188, |
| Color Fastness to Crocking,"AATCC 08, ISO 105-X12",IS0/IEC 17025:2017 |
| Color Fastness to Storage: Dye Transfer,AATCC 163, |
| Absorbency of Textiles,AATCC 79,IS0/IEC 17025:2017 |
| Vertical/Horizontal Wicking of Textiles,AATCC 197,IS0/IEC 17025:2017 |
| Phenolic Yellowing of Textiles,ISO 105 X-18,IS0/IEC 17025:2017 |
| Fault in Cloth,Standard Protocol, |
| Identification of yarn/Fabric,Standard Protocol, |
| Percentage of yarn in Fabric (per side),Standard Protocol, |
| Visual assessment of color difference of textile,AATCC EP 9, |
| Opacity/Light Blocking,AATCC 203, |
| Attachement Pull Test/Snap Test,Standard Protocol, |
| Size Percentage and finish percentage,Standard Protocol, |
| Biodegradability of Textile Fabrics,ISO 11721-1, |
| Resistance to micro-organisms (soil burial test),BS 6085, |
| Zip Strength Test,Standard Protocol, |
| Thermal resistance of fabric (Sweat Guard Hotplate),"ISO 11092, F 1868-02",IS0/IEC 17025:2017 |
| Water Vapor resistance (Sweat Guard Hotplate),"ISO 11092, F 1868-02",IS0/IEC 17025:2017 |
| Water Vapor Permeability (Cup Method),"BS-3424-34, BS 7209, ISO 8096",IS0/IEC 17025:2017 |
| Air Permeability Test,"ASTM D 737 , ISO 9237",IS0/IEC 17025:2017 |
| Relative Hand value Using Phabrometer,AATCC TM-202,IS0/IEC 17025:2017 |
| Fabric Stiffness,ASTM D 4032,IS0/IEC 17025:2017 |
| Moisture Management of Textile (MMT),AATCC 195,IS0/IEC 17025:2017 |
| Drying Rate Test,"AATCC 199, IS0 17617",IS0/IEC 17025:2017 |
| Fabric Drape Test,BS 5058, |
| Kawabata Shear Test,KES-FB1, |
| Kawabata Bending Test,KES-FB2, |
| Kawabata compression Test,KES-FB3, |
| Kawabata Surface Test,KES-FB4, |
| Kawabata Thermal Test,KES-FB7, |
| Fabric Touch Properties of Fabric (Bending, Compression, friction, roughness and thermal conductivity)",Standard Protocol, |
| Flammabaility ,"16CFR, ISO 12952-1 ,ISO 12952-2, EN 597-1, EN 597-2, ISO 15025-1, ISO 6940-41, BS 7837, BS EN 1625, BS 5815-3, A 688 (17), BS 5852-1,EN 7177 (for low hazards), CPAI 84", |
| Burning behaviour of Textiles,"ISO 6940, ISO 15025, BS 7837, ISO 6941:2003, BS 1625",IS0/IEC 17025:2017 |
| Limiting Oxygen Index Test,ISO 4589-1 ASTM D 2863, |
| Static Charge Test (Conductivity Tester),"EN 1149-1, EN 1149-2", |
| UV/Sun Protection Factor Test,AATCC 183, |
| Coup Cut Resistance Test,EN 388, |
| Abrasion Resistance,EN 388, |
| Puncture Resistance,EN 388, |
| Tear Resistance,EN 388, |
| Water Repellency (Spray Method),AATCC 22, |
| Water Resistance of Fabric (Hydrostatic Head Test),"ISO 811, AATCC 127",IS0/IEC 17025:2017 |
| Atomic Absorption,Standard Protocol, |
| Particle size Analysis (Zeta Potential),Standard Protocol, |
| Material Identification by FTIR,Standard Protocol, |
| Differential Scanning Calorimeter (DSC),ASTM D 3418, |
| Electro-Kinetic Potential (Zeta Potential) of Fabric,Standard Protocol, |
| Dynamic Mechanical Analyzer,ASTM D 4065, |
| Thermogravimetric Analyzer,Standard Protocol, |
| Dilatometer,Standard Protocol, |
| Rheometer,Standard Protocol, |
| Drop Weight Impact Tester,Standard Protocol, |
| Pendulum Impact Tester,Standard Protocol, |
| Melt Flow Index,Standard Protocol, |
| Total Insoluble matters ,Standard Protocol, |
| Chemical Screening /Evaluations,Standard Protocol, |
| Solid Contents of Chemicals,Standard Protocol, |
| Purity Percentage of Acids,Standard Protocol, |
| Purity Percentage of Bases,Standard Protocol, |
| Purity Percentage of Hydrogen Per Oxide,Standard Protocol, |
| AZO Dyes (Textile),ISO 14362-1&3:2017,IS0/IEC 17025:2017 |
| Alkyl Phenol Ethoxylate APEO(Textile),ISO 18254-I,IS0/IEC 17025:2017 |
| Alkyl Phenol (AP) (Textile),ISO 21084:2019,IS0/IEC 17025:2017 |
| Polyvinyl chloride (PVC) & Polyurethane (PU),Inhouse/FTIR,IS0/IEC 17025:2017 |
| Phthalates (Textile),ISO 14389:2014,IS0/IEC 17025:2017 |
| Phthalates (Polymer),CPSC-CH-C1001-09.4,IS0/IEC 17025:2017 |
| Formaldehyde (Textile),"AATCC.112, ISO 14184-1, iso 14184-2, JISL 1041:2011",IS0/IEC 17025:2017 |
| Odor (Textile),SNV 195651,IS0/IEC 17025:2017 |
| Extractable heavy metals Single Element(Textile),EN 16711-2:2016,IS0/IEC 17025:2017 |
| Extractable heavy metals Multi Element(Textile),EN 16711-2:2016,IS0/IEC 17025:2017 |
| Total Lead (Pb) in Children�s Metal Products,CPSC-CH-E1001-08.3,IS0/IEC 17025:2017 |
| Total Cadmium,EN 1122, |
| Lead (Pb) in Paint and Other Similar Surface Coatings,CPSC-CH-E1003-09.1, |
| Total Lead (Pb) in Nonmetal children�s Products,CPSC-CH-E1002-08.3, |
| Azo Dyes in Leather,ISO 17234-1:2020, |
| Extractable heavy metals (Leather) multi Element,ISO 17072-1:2019, |
| Migration of certain Elements,Safety of Toys EN 71-3, |
| Determination Of Chloro-Organic Carriers In Textile And Leather,EN 17137:2018, |
| Aniline,ISO 14362-1 , |
| Total Metals In Leather,ISO 17072-2, |
| Total Metals In textile,EN 16711-1:2016, |
| Antibacterial Activity (Qualitative),AATCC 147,IAC Approved |
| Antibacterial Activity (Quantitative),AATCC 100,IAC Approved |
| Viscosity of Solution,, |
| Surface Tension of Liquids,ASTM D 1331, |
| pH of Liquids,Standard Protocol, |
| pH of water-Extract from Textiles,"ISO 3071, AATCC 81",IS0/IEC 17025:2017 |
| Dye Class Identification Test,Standard Protocol, |
| Comparisons of dyes and auxiliaries,Standard Protocol, |
| Evaluation of printing thickener/Binder,Standard Protocol, |
| Available chlorine test,IS 2350:1963, |
| Chemical Comparison,Standard Protocol, |
| Resistance to body Fluids/Synthetic Blood,ISO 16603,IS0/IEC 17025:2017 |
| Water Impact Penetration,AATCC 42,IS0/IEC 17025:2017 |
| Differential Pressure,BS EN 14683,IS0/IEC 17025:2017 |
| Splash Resistance (synthetic blood),ISO 22609,IS0/IEC 17025:2017 |
| Particle Filtration Efficiency,EN 143,IS0/IEC 17025:2017 |
| HEMP Chemical Analysis,Standard Protocol, |
| Young's modulus,Standard Protocol, |
| Density,Standard Protocol, |
| Tenacity,Standard Protocol, |
| Elongation at Break,Standard Protocol, |
| Breaking Stress,Standard Protocol, |
| chemical oxygen demand,Standard Protocol, |
| TDS,Standard Protocol, |
| Water Hardness,Standard Protocol, |
| Total Heavy Metals,Standard Protocol, |